Soft solders - Fluxcored lead containing

Solders are used where you need a very low working temperature when joining metals and for electrical and electronic applications.

Below are our lead containing fluxcored solders for applications like roofing, electronics, body work, tinning, joining etc.

Read more about our complete range of solders

Meltolit Pb60Sn40 "RA"

The soldering wire "RA" can be used for manual and machine soldering in the area of electrical engineering and electronics. Melting range: 183-238°C.

Halogen-activated natural resin (colophony)
Rapid dispersion
Solid, non-adhesive residues which can remain at the soldering point.
No-Clean

Meltolit Sn60Pb40 "RA"

The soldering wire "RA" can be used for manual and machine soldering in the area of electrical engineering and electronics. Melting range: 183-190°C.

Halogen-activated natural resin (colophony)
Rapid dispersion
Solid, non-adhesive residues which can remain at the soldering point.
No-Clean

Meltolit Pb60Sn40 "KD"

The "KD" soldering wire can be used for manual and robot soldering and flame brazing. The low flux residues should be removed after the soldering process. Melting range: 183-238°C.

Very high activation
Suitable for most metal surfaces
Residues must be removed
Residues are easily soluble in water
Not for stainless steel and aluminium

Meltolit Sn60Pb40 "KD"

The "KD" soldering wire can be used for manual and robot soldering and flame brazing. The low flux residues should be removed after the soldering process. Melting range: 183-190°C.